Philips PUS8359 (IPS) vs Hisense A7NQ

The quality of HDR effect on the Philips PUS8359/12 television is also not impressive. A brightness level of 280 nits is too low, resembling standard SDR more than true HDR, which is clearly visible on the five tested images. Additionally, the television does not impress in terms of color gamut coverage – just 76% DCI-P3 is a result that can be considered weak, especially compared to other models in a similar price range.

We checked how the Hisense A7NQ performs with HDR, and there are no surprises here. The luminance chart showed a maximum brightness of 370 nits. The result? Exactly what one could expect – average. At a brightness of around 350 nits, HDR does not stand out particularly compared to SDR. Yes, a subtle difference can be seen in more brightly lit scenes, but it’s not a jaw-dropping effect. As for the coverage of the wide color gamut, the result was 92% for DCI-P3 and 70.2% for BT.2020. These are decent values for a TV in this class that uses an PFS coating – the same one that is sometimes promoted as QLED. Colors look good, but let’s not expect anything that competes with the best screens on the market. HDR on the Hisense A7NQ is more of an addition than a "game changer." For those looking for solid picture quality on a moderate budget – absolutely acceptable. However, if we expect full HDR capabilities, it is worth looking at higher-end models.

The "Film" mode turned out to be the most faithful in terms of compliance with the source material used in our tests. However, like other factory modes, it also had its drawbacks. In both SDR and HDR materials, we noticed issues with white balance, where the dominance of green and red resulted in a yellowish tint. This effect was particularly visible in the form of yellowed whites and unnatural skin tones. The "ColourChecker" palette test showed that every color was shifted towards warmer tones, which affected color accuracy. A key aspect of the image is also contrast and brightness, which can be evaluated by analyzing gamma charts and the EOTF curve. On the gamma chart, we observed significant deviations – both too high values causing loss of detail in the shadows and too low values leading to a drastic decrease in contrast. Compared to gamma, the EOTF curve performed better, only slightly brightening the image, which had a less negative impact on overall quality.

When testing the Hisense A7NQ in Filmmaker mode, we hoped for compliance with the manufacturer's assumptions, but unfortunately, reality looks different. The main issue, as with most TVs, is the white balance. In the case of the A7NQ, we noticed a clear dominance of blue, which affected both lower quality materials and 4K HDR content. The Color Checker test results confirm this, and the comparison images speak for themselves – the main actress appears cool and pale in "factory" mode. It looks as if she has been stripped of life.

Regarding brightness characteristics, both gamma and the EOTF curve show that the image is excessively bright. As a result, everything seems flat, lacking depth and contrast. This state of affairs definitely does not work in favor of the A7NQ and makes the viewing experience in factory mode leave much to be desired. If we expect natural color reproduction and appropriate image depth, the A7NQ in Filmmaker mode is unlikely to impress us. It is a TV that requires significant adjustment to extract its potential.

Philips, both in its cheaper and more expensive models, offers a wide range of tools for image calibration. We used them to improve the quality of the displayed image, although it was not as simple as it might seem. We managed to adjust the white balance, improve the gamma, and tune the EOTF curve; however, despite these actions, the deltaE errors were still at a very high level. The main causes are limited coverage of the DCI-P3 color palette and low maximum brightness, which significantly affected the final result. Although the overall presentation looks much better, the design features of the TV did not allow us to achieve spectacular results.

The Hisense A7NQ offers several tools that allow you to improve image quality, so we decided to take matters into our own hands and "dig around" in the settings a bit. Thanks to professional tools and measurements, we managed to correct the white balance, eliminating the excessive dominance of blue color in both HD and 4K materials. This is a significant step forward, as in the Color Checker test, color reproduction errors in lower quality content dropped to a much more acceptable level. Unfortunately, 4K materials are still far from ideal – color distortions are considerable and stem from the limitations of the television.

As for gamma, we managed to set it at the correct level, which significantly reduced excessive brightness of the image. However, the issue with brightness characteristics in 4K content remains unresolved – the EOTF curve still shows excessive illumination of the entire screen. It is possible that a proper implementation of dynamic tone mapping could help here, but as we mentioned earlier, this feature on the Hisense A7NQ works rather poorly instead of being helpful. Nevertheless, calibration significantly improved the overall image perception. The director's vision is now much better conveyed than in the factory settings, which more demanding viewers will certainly appreciate.

In this paragraph, we will look at two functionalities. We will once again take a look at the function responsible for tonal transitions, but we will also check how the television handles image scaling. The option responsible for smooth gradation is the one called "Distortion Reduction." As we established, it quite effectively smooths out the choppiness. However, we must point out two things: we cannot enable it for HDR materials and that it blurs details in films. The tested television cannot boast the best image scaling. There is a noticeable overall blurriness of the image, but, worse, it blurs details. This is particularly visible on the branches and the hair of the model. A characteristic white halo around the character is also noticeable.

The Hisense A7NQ impresses with smooth tonal transitions in 4K materials, but unfortunately, there is no feature here that would improve this aspect in older materials of lower quality. In such cases, color merging becomes more visible, which can somewhat spoil the viewing experience, especially in scenes with a lot of gradients.

When it comes to upscaling, the TV performs surprisingly well. The image is clearly improved, although it does come with some compromises. One can notice that the TV adds a bit of artificial sharpness, and elements in the background, such as branches, tend to exhibit slight "jagginess." These are details, however, that will mainly catch the eye of those who pay attention to such nuances.

Philips PUS8359 is not the best choice for watching sports. The lack of even basic motion enhancement features means that the picture in dynamic scenes is not suitably clear. Despite using an IPS panel (43 and 55'), which theoretically should offer better sharpness than VA panel variants, there is no noticeable improvement in terms of motion blur. In fast-moving images, it is clear that the UFO character is distinctly blurred, which indicates that the television does not cope well with maintaining sharpness in dynamic shots.

The Hisense A7NQ is equipped with a 60 Hz matrix, which means that dynamic scenes – for example, in sports or games – are somewhat average here. This is standard for this class of equipment, but it must be admitted that watching more intense, fast-moving content can leave a lot to be desired. However, when it comes to movies, the TV offers a motion smoothing feature that operates on a 10-level scale. The "motion blur reduction" option allows you to adjust the fluidity of the image to your own preferences. At the lowest setting, you get a natural film frame rate, which will please cinema purists. On the other hand, the maximum setting provides a very smooth, theatrical image that may appeal to those who prefer a more "smoothed out" motion.

In terms of compatibility with consoles, the Philips PUS8359 is mainly suitable for casual gamers. Although the TV is equipped with an HDMI 2.0 port, it offers features such as Auto Low Latency Mode (ALLM), Variable Refresh Rate (VRR), and Game Bar. ALLM automatically switches the TV to low latency mode, facilitating quicker reactions during gameplay, while VRR smoothly adjusts the refresh rate, eliminating the issue of screen tearing. Game Bar provides quick access to game settings and real-time monitoring of parameters; however, in our opinion, it performs worse compared to competitors' solutions.

However, more demanding gamers may feel underwhelmed. The Philips PUS8359 does not support advanced HDR formats in games or higher refresh rates, which is due to the use of a 60 Hz panel. These shortcomings limit the TV's capabilities in delivering smooth and detailed experiences during fast-paced, dynamic gameplay.

Hisense A7NQ is a device that can pleasantly surprise gamers, although it is not without its faults. The fact that we have a 60 Hz panel immediately suggests that the TV is not designed for the most demanding gaming scenarios. The motion blur we described earlier can also be a hindrance, especially in dynamic games.

However, there are several things worth praising. The TV supports ALLM (Auto Low Latency Mode) and VRR (Variable Refresh Rate), which are not always standard in this price range. The biggest surprise, however, is that the A7NQ can display images at 120 Hz – although only in Full HD resolution, it is still a significant nod to gamers. This allows a choice between smoothness and resolution, which is not obvious in TVs at this price point.

A nice addition is the Game Bar, which is clear and practical – all the main features are at hand without digging through the settings. However, there is a lack of support for HGiG, which may be disappointing for gamers looking for perfect HDR in games.