TCL P755 vs Philips PML9009 / 9019 / 9059

The TCL P755 delivers an average HDR experience, with a maximum brightness of just under 300 nits. This limitation affects the intensity of bright areas in HDR content, reducing the contrast impact, as bright elements may appear less pronounced. However, the TV compensates with an impressive 93% coverage of the DCI-P3 colour gamut, which brings vibrant, saturated colours that enhance the quality of HDR content. Despite the brightness cap, the extensive colour range enriches hues, providing a more lifelike and visually engaging viewing experience.

The Philips PML9009 struggles to deliver the highest HDR performance. Scenes with effects around 550 nits don’t provide particularly impressive lighting, though the effects remain stable, an improvement over SDR materials. A notable exception is in Gemini Man, where a flashlight as the sole light source stands out. This is likely due to the absence of large dark areas and the relatively small size of the light source compared to scenes with larger, brighter elements like the sun. While the brightness results in HDR content aren’t quite strong enough to recommend this TV for productions utilising a wide colour gamut, it’s worth mentioning that the model does achieve decent coverage, reaching 93% of the DCI-P3 spectrum.

In Cinema mode, the colour reproduction on the TCL P755, while set to the best factory configuration, falls short of ideal accuracy. The primary issue is the white balance, where the red component is notably elevated and the green is reduced. This imbalance shifts colours towards red, making them appear unnatural, particularly in scenes featuring white or neutral tones. This issue is highlighted in the Colour Checker test, which shows a discernible red bias affecting the realism of the image and diminishing the perception of colour depth.

Examining contrast performance, the gamma graph analysis reveals notable inconsistencies, especially in darker areas, where values dip below the target level of 2.4. Consequently, shadows and darker sections are displayed brighter than intended, impacting overall contrast. Furthermore, the EOTF (Electro-Optical Transfer Function) curve, essential for accurate brightness representation, veers slightly above the reference curve. The data shows a boost in brightness up to around 50% before a gradual levelling off. This creates excessive mid-tone brightness, which can lead to loss of detail and some distortion in brighter scenes, ultimately affecting the clarity and immersion of the viewing experience.

During testing, the Philips PML9009 performed best in the factory "Filmmaker" mode, which we evaluated across both SDR and HDR content. A key characteristic observed in this mode is the EOTF curve’s behaviour in HDR content and gamma settings in SDR, designed to enhance image accuracy. However, the PML9009 presented noticeable issues, particularly with white balance, as a pronounced red dominance created a yellow tint across the entire image. This affected skin tones and white areas, with faces and whites appearing unnaturally warm. The colour shift was confirmed through the "ColourChecker" palette, where colours leaned towards warmer shades.

In the gamma analysis, responsible for image contrast, we noticed considerable inaccuracies early on. Our measured values spiked above the reference, causing dark scenes to lose detail and merge visually up to about 10% screen brightness. Following this, the values dropped below the target line, further degrading contrast—an area already challenging for this model.

In HDR content, the white balance remained similarly flawed, and the EOTF curve also restricted brightness levels, resulting in a dim, muted image. Colour inaccuracies were even more pronounced here, with lower luminance levels causing large deviations from accurate colours, which were clearly visible on the error graph, often exceeding acceptable limits. While aiming for cinematic quality, this mode ultimately fell short in delivering balanced colour and contrast fidelity.

Post-calibration, the TCL P755 delivers a markedly improved colour performance for SDR content. The colour curves now align closely with ideal values, with a more consistent gamma stability across the range. While a slight drop at the beginning of the gamma curve persists, the accuracy in colour reproduction is significantly enhanced. The Colour Checker test reveals most colour samples are now under an error threshold of 2, showcasing much-improved colour fidelity with only minimal deviations, resulting in colours that feel notably more authentic to life.

HDR content benefits from these calibration adjustments as well. White balance corrections lend a more natural tone, with colours appearing more balanced overall. The EOTF curve, while nearer to the ideal reference line, still features a mild brightness elevation at the start, which can cause minor distortions in exceptionally bright scenes. However, overall tonal quality and detail resolution have both improved. Tone mapping also performs more effectively, enhancing detail in bright regions while maintaining better image accuracy.

In summary, while calibration does not bring flawless performance, it makes a substantial difference in the P755’s visual quality. Following these adjustments, the television provides a more accurate, realistic viewing experience in both SDR and HDR content, smoothing out many of the previous colour inconsistencies for a more visually engaging result.

Philips has long provided sophisticated calibration tools, including 2-point and 20-point grayscale adjustments as well as an advanced CMS (Colour Management System). These allow users to make significant improvements, and even those less attentive to image quality will likely notice a positive difference post-calibration. Both SDR and HDR content benefit from this process, notably eliminating the prominent yellow tint caused by an overemphasis on red in the white balance.

For SDR content, although gamma adjustments don’t entirely resolve the loss of detail in dark areas, the overall improvements bring most content to an impressive standard, with minimal, hardly perceptible errors. Colour accuracy is notably enhanced, achieving nearly reference quality with low deltaE errors.

HDR content, however, remains somewhat limited due to the display’s lower brightness capability. While the white balance has largely been corrected, a slight blue tint can occasionally appear. The EOTF curve aligns very well, providing accurate geometry, though colour errors persist due to the limited luminance. This calibration offers a substantial improvement but may still fall short for viewers who expect high brightness levels in HDR.

The "Gradual Smoothing" function on the TCL P755 performs effectively, reducing visible boundaries between shades of the same colour and creating smoother tonal transitions. Unfortunately, this feature is unavailable in HDR mode, which can impact the quality of tonal gradations in high dynamic range content.

In terms of image scaling, the television shows some limitations. There are visible edge cut-offs, especially noticeable around figures and tree branches, which result in some detail blurring and a reduction in overall image sharpness. This is particularly noticeable when viewing lower-resolution content. Additionally, SD-quality images display a slight crop at the top and bottom, which may further impact viewing for standard-definition content.

Given the impressive handling of tonal transitions by the Philips PML9009, one might expect similar success in the image scaling test. However, the results were less than stellar. When upscaling lower-quality images, like those from certain TV programmes or older films, the Philips algorithm tended to blur fine details noticeably, especially in intricate elements like fine branches or a model's hair.

On the other hand, the tonal transition performance remains noteworthy, with the TV offering several levels of smoothing. Even at the lowest setting, it effectively addresses non-smooth transitions in most materials, and crucially, it preserves the film grain effect, maintaining fidelity to the director's vision. However, it’s worth noting that some fine details may still appear slightly softened.

The TCL P755 delivers satisfactory, though not flawless, motion smoothness. It includes a "Flicker Reduction" feature for films, allowing users to fine-tune motion smoothness on a scale from 1 to 10. This setting offers flexibility in tailoring the image to cinematic or more theatrical preferences, adjusting for a slower or faster appearance according to personal viewing taste.

The Philips PML9009 has a 120 Hz native refresh rate, a baseline standard for watching sports and an ideal setting for gaming on consoles or PCs. Philips includes an effective motion-enhancement system for users who want to reduce the stutter of 24 fps content or need fluid motion for fast-paced scenes, like in football matches. The dedicated "Smoothness" slider effectively mitigates stuttering, while "Motion Blur Reduction" enhances the sharpness of dynamic content. Each setting produces a noticeable difference, so users can tailor the motion effects to their preferences. Our recommended setup achieves a moderate smoothing effect, avoiding the exaggerated “soap opera” appearance.

Regarding pixel response time, VA panels like this generally fall short compared to OLED or even IPS panels, which can lead to a slight "black halo" trailing behind fast-moving objects. Although not a frequent issue with this TV, the effect can be seen in certain scenes.

The TCL P755 comes equipped with gamer-oriented features like ALLM (Auto Low Latency Mode), VRR (Variable Refresh Rate), Dolby Vision for gaming, and a Game Bar. ALLM automatically activates low latency mode to enhance response times and reduce input lag, while VRR syncs the screen refresh rate with the console's frame output, minimising screen tearing for a smoother gaming experience. Dolby Vision for gamers brings improved colour and contrast for compatible games, and the Game Bar allows easy access to essential settings like response time.

However, the 60 Hz panel limits the display to this refresh rate across resolutions, which may impact the fluidity in high-motion games. The absence of G-Sync also affects PC gamers, as gameplay on computers lacks this technology's extra smoothing. Notably, HGiG mode, meant to optimise HDR game visuals, is not fully functional on this model, which slightly detracts from the HDR gaming experience.

The Philips PML9009, with HDMI 2.1 ports supporting full bandwidth, is thoroughly equipped with gamer-focused features. Core functions like Variable Refresh Rate (VRR) and Auto Low Latency Mode (ALLM) are included, as well as the additional perks of G-Sync and FreeSync compatibility and low-lag HDR Dolby Vision support. All these gaming features activate seamlessly, proving this model’s suitability for gaming. The TV’s HGIG mode, particularly beneficial for gaming, adjusts HDR effects to the television’s capabilities to avoid image dimming and blooming, an advantage given the still limited number of games supporting Dolby Vision.

For added convenience, the PML9009 has a GameBar menu, allowing in-game setting adjustments without needing to exit. This menu includes features like a crosshair option and black level correction, which can enhance the visibility of shadowed areas—ideal for competitive play.

Overall, the Philips PML9009 offers a comprehensive setup for gamers, supporting VRR, ALLM, G-Sync, FreeSync, and HDR Dolby Vision to deliver immersive, high-quality gaming experiences across a wide range of titles.