Sony Bravia 7 (XR70) vs Philips OLED769

Since we know that the television performs well with contrast, let's check how it fares in terms of HDR effects. The luminance graph shows the very high capabilities of this model – 1500 nits is truly an impressive result. HDR effects are particularly striking in scenes where most of the screen is covered in light, as seen in the 1st, 3rd, and 5th test scenes. Minor shortcomings, typical of this technology, are still noticeable with very small light effects, such as in the scene from the movie "Sicario 2," where brightness drops to 500 nits. Although these are not stunning results, they can be considered decent. Additionally, it is worth praising the television for its high coverage of a wide color gamut – DCI-P3 at 96%, which allows for vibrant, saturated colors.

The Philips OLED769 performs admirably in film scenes featuring small bright elements. With peak brightness reaching around 800 nits, the TV handles light sources like street lamps or stars with remarkable vividness and detail. However, its limitations become evident during scenes with full-screen brightness, such as sun glare, where brightness drops to approximately 250 nits. This is a common challenge for more affordable OLED models, which often struggle to sustain high brightness across the entire display.

The IMAX Enhanced mode on the Sony BRAVIA 7 television is definitely the best mode available on this model, although it is not without its flaws, as its name might suggest. The biggest issue is white balance – both in HD and 4K HDR content, there is a noticeable dominance of red color, which makes the image take on pinkish shades. This is particularly evident on the tested snow screen, where the pinkish hue becomes very noticeable. Errors in the Colour Checker test also confirm these deviations – although they are not catastrophic, there is a tendency to lean towards warmer tones. As for brightness characteristics, gamma remains at a decent level with a slight bump but without major issues. However, the biggest challenge is 4K materials. It is clear that the EOTF curve is significantly above the reference chart, which causes the image to become too bright.

The "Film" mode on the Philips OLED769 proved to be the most faithful factory setting for preserving the source material, and it was the basis for our tests. However, like other factory presets, it has a few flaws. Let’s break down the key issues observed in SDR and HDR content.

In both formats, the white balance exhibited a noticeable dominance of green and red tones. This led to a yellowish tint across the image, resulting in yellowed whites and slightly unnatural skin tones. This was particularly evident in the "ColourChecker" palette, where colour samples leaned toward warmer shades.

In terms of contrast and brightness, two critical graphs tell the story: the Gamma curve for HD content and the EOTF curve for 4K HDR content. For SDR, the gamma value dips below the ideal 2.4 level, causing lighter parts of the image to appear overly bright. This overexposure reduces detail and depth in bright areas. In contrast, the EOTF curve for HDR content performed admirably, accurately maintaining details in both bright and dark regions. This ensures realistic, dynamic scene reproduction that enhances the overall viewing experience.

Sony BRAVIA XR70 offers a wide range of tools that allow for customizing the picture to personal preferences, which has enabled us to make significant adjustments to the settings. The white balance has been free of the issue of red hue dominance – snow no longer ends up with pink shades, which was previously noticeable. Although one can detect minor deviations at the end of the white balance chart concerning a drop in blue color, they are acceptable and hard to notice in everyday use. The Colour Checker test confirms that color reproduction errors are no longer as pronounced and rarely exceed a value of 2, which is a very good result. As for brightness, gamma, while not requiring significant improvement, has been slightly adjusted. However, the most notable change has been observed in the EOTF curve – the television no longer has issues with overly brightening the entire image in 4K content. However, upon closer analysis and enabling EOTF characteristics in films, certain limitations of the television arise due to the previously discussed dimming algorithm. Some small elements may be slightly more illuminated, but these errors are so minor that most users will not notice them. Overall, the calibration results are very, very positive.

After professional calibration, the Philips OLED769 truly excels in colour accuracy. Any yellow tint previously seen in HD and 4K content is now eliminated. The Colour Checker test shows minimal deltaE errors, occasionally exceeding a value of 2, which indicates a nearly perfect representation of the director's intent.

When it comes to contrast, the results are equally impressive. For 4K materials, there was little room for improvement initially, but the gamma curve has been significantly refined. This leads to a more accurate rendering of dark and bright areas, resulting in a dynamic and realistic viewing experience.

Thanks to the calibration, the full potential of the television has been unlocked. The Philips OLED769 now delivers vibrant, natural, and high-quality images, making it an excellent choice for movie lovers and multimedia users.

Since we know that the television performs very well with high-quality materials, it is worth checking how it fares with lower-quality content. Here the television shows its potential, and the applied graphics processor works really well. On the test board with the light bulb, there are no visible issues with color transitions, and the smooth gradation function works very well – we recommend setting it to "Medium".

When it comes to digital processing, or so-called upscaling, the television sharpens the image quite a bit, which leads to slight aliasing, for example on branches in the background, but it does not remove desired details. Nonetheless, the overall appearance is truly attractive and may appeal to most users. However, if we prefer a softer, more plastic image, this effect can be reduced in the settings by adjusting the sharpening level to our personal preferences.

When it comes to lower-quality materials, the distortion reduction in the Philips OLED769 does well in smoothing tonal transitions, especially at the minimum setting. It's worth noting that film grain is not blurred, which is a positive surprise, as such negative phenomena often occur with other manufacturers. Overall, this is quite a decent solution. However, it should be pointed out that this setting does not work in HDR mode, where gradation issues are much more pronounced. In HDR mode, the TV struggles with smoothing tonal transitions and may exhibit more noticeable distortions and noise, reducing image quality in dynamic scenes.

As for digital processing, the Philips OLED769 performs well. The model in the photo is not overly jagged, and the branches in the background lack characteristic jagged edges. The TV achieves this effect thanks to the absence of artificial sharpness, which may be an advantage for some users. However, others may find this less attractive as they prefer a more pronounced, sharper image instead of a subtle effect. This effect can be mitigated using a higher setting for the "Sharpness" parameter.

The Sony BRAVIA 7 television with a 120 Hz panel will satisfy most users in terms of motion smoothness. Additionally, Sony offers the Motion Flow feature, which allows for the selection of three different picture settings, adjusting them to personal preferences: Smoothness – Film: This setting improves motion smoothness, giving the image a more cinematic or theatrical character. Smoothness – Camera: This setting provides even greater smoothness, useful when watching dynamic scenes such as sports broadcasts. Clarity: This setting focuses on minimizing noise and motion artifacts, resulting in a more stable and clear image.

The Philips OLED769 features a multi-stage motion smoother called "Motion Style," which will satisfy users who value the ability to customize motion fluidity in movies. Thanks to this function, the image can be set to be more frame-like or fluid, resembling a theatrical effect. This is a great solution for those who want to match the displayed content to their visual preferences. Gamers will also be pleased, as the TV, like most OLEDs, is equipped with a 120Hz panel. This provides extraordinary fluidity and image dynamics. Unfortunately, the Philips OLED769 lacks BFI (Black Frame Insertion) functionality, which could further improve motion fluidity and sharpness. Despite this limitation, it offers excellent visual experiences for cinema and gaming enthusiasts, one of its main strengths.

Sony Bravia 7 has significantly improved its capabilities for cooperation with consoles compared to previous models. The TV supports variable refresh rate (VRR), which eliminates screen tearing, and it is compatible with graphics cards, ensuring smooth display. The auto low latency mode (ALLM) effectively reduces input lag, which is crucial in fast-paced games. Dolby Vision with low latency additionally provides impressive HDR effects that look great during gameplay.

Sony Bravia 7 also offers a Game Bar feature that provides quick access to settings and allows monitoring of parameters during gameplay. An interesting option is the ability to enable a virtual crosshair on the screen, which can give a slight advantage in shooting games. However, compared to the Bravia 9 model, the HGIG feature in the Bravia 7 does not perform as well, which may be noticeable for more demanding gamers – especially since the HGIG mode is becoming more popular in the gaming world as the preferred method for reproducing HDR effects.

A downside is the lack of support for 1440p@120 Hz resolution, which could make gaming easier for users with less powerful graphics cards. Additionally, the Sony Bravia 7 is equipped with two HDMI 2.1 ports, one of which is often used to connect an audio system via eARC, limiting the number of available ports for connecting next-generation consoles.

The Philips OLED769 was created with gamers in mind, offering full compatibility with consoles and the highest-quality gameplay. The television received the maximum rating in this category, providing everything one could desire. With HDMI 2.1 ports fully supporting ALLM (Auto Low Latency Mode) and VRR (Variable Refresh Rate), the television ensures smooth and hassle-free gaming. ALLM automatically switches the TV to low latency mode, and VRR eliminates stuttering and screen tearing, resulting in fluidity and stability in gameplay. The Dolby Vision feature for gamers is another advantage, though it only works at 60 Hz. Most casual gamers are unlikely to feel the lack of a higher frequency, but more demanding users may have some reservations. This allows for enjoying a dynamic range of tones and realistic images, enhancing the gaming experience. PC gamers will also not be disappointed, as the Philips OLED769 offers full compatibility with Nvidia graphics cards, thanks to support for G-Sync. This technology synchronizes the TV's refresh rate with the graphics card, eliminating tearing and stuttering, translating to excellent image smoothness.

The Philips OLED769 is a television that perfectly meets the needs of gamers, offering a wide range of advanced features and technologies that significantly improve game quality and user comfort.